Centrifuge CF-350

The CF-350 is a universal laboratory centrifuge designed for use in medical, industrial, and scientific laboratories for separating substances with different relative densities by centrifugal force. The maximum rotational speed of 15,000 rpm gives the centrifugal force of 21,630 rcf.

Power Rating: 115-230 VAC, 50/60 Hz
Maximum Power Consumption: 500W
Maximum Rotation Speed: 200 to 15,000 rpm, in steps of 10 rpm
Maximum G Force: 21,630 rcf
Maximum Capacity: 6 x 50 mL (Angle Rotor) 4 x 200 mL (Swing out Rotor)
Rotors Available: 13
Time: 10 s to 99 min and continuous, step 10 s
Programs: 100
Acceleration Levels: 10
Deceleration Levels: 10 (Level 0 without braking)
Display: LED
Noise level (at max. speed): ≤ 61 dBA
Fast Spin: Yes
Lid Locking Mechanism: Motorized
Lid Lock: 2 Latches
Motor Type: Induction brushless motor
Permitted Ambient Conditions: Temperature: 2 to 35 °C, Humidity: 75 %, Non-Condensing
Dimensions: W: 15.9" (40.5 cm), D: 19.7" (50.0 cm), H: 12.8" (32.5 cm) (H: with lid open 23.9" (60.6 cm)
Weight: 63.9 lbs. (29 kg)
Warranty: One Year

General Information

A wide usage of programming options and electronic operation control allow for trouble-free use. With a special drive, quiet, maintenance-free operation with no carbon dust pollution is guaranteed.

The centrifuge has user-friendly options that make operation and standard settings easier. Built-in error-detecting functions keep the user from entering incorrect values and monitor the whole operation.

The centrifuge has the possibility to save programs. In the program memory, you can save up to 100 different programs. The centrifuge always keeps the last run program in its memory for an unlimited amount of time, allowing the program to be restarted at any time, even if the centrifuge was turned off during operation. All important operation parameters can be seen at a glance.

The settings are entered with knobs and keys on the control panel. The centrifuge’s interior is also easy to clean.